C55 Waterlord

C55 Waterlord

Waterlord® is a high-quality hose for pumping water out of and across
mine sites. It is suitable for many industrial pumping applications when
high pressure is required. Reel systems are also available for ease of
handling large diameter hose.

Waterlord® is manufactured by weaving a textile reinforcement of
high-tensile polyester, then extruded with abrasion-resistant
polyurethane. The tough cover protects the hose against damage from
most rocks and soils; extra protection is required if used on rough terrain.

Waterlord® is able to withstand high pressures; can be easily used to
pump up high walls from deep inside a mine. Flanges or couplings are
available, which can easily connect to existing pipelines.
Proudly manufactured in Australia by Crusader Hose, Waterlord®
is made in a large range of diameters from 40 mm to 305 mm and is
available in continuous lengths of up to 250 m. Each roll is fully tested at
our factory prior to despatch to your site.

Diameter (ID) 40 mm 51 mm 76 mm 76 mm HP 102 mm 102 mm HP 152 mm 152 mm HP 203 mm 254 mm 305 mm
1.5″ 2″ 3″ 3″ 4″ 4″ 6″ 6″ 8″ 10″ 12′
Working pressure 2700 kPa 2700 kPa 2700 kPa 4000 kPa 2500 kPa 4000 kPa 2800 kPa 3500 kPa 2000 kPa 1500 kPa 1400 kPa
Burst pressure 5400 kPa 5400 kPa 5400 kPa 8000 kPa 5000 kPa 8000 kPa 5600 kPa 7000 kPa 4000 kPa 3000 kPa 2800 kPa
Bend radius
@ 60 psi
1.0m 1.0m 1.5m 1.6m 2.0m 2.1 m 3.1 m 3.2m 3.5m 4.0m 4.5m
Tensile load 3 t 3.5 t at lot lot 15 t 16 t 25 t 22 t 30 t 31 t
Weight/m 0.5 kg 0.6 kg 0.9 kg 1.5 kg 1.5 kg 2.3 kg 3.0 kg 3.4 kg 3.5 kg 4.0 kg 4.5 kg
Avg. single wall
thickness
3 mm 3 mm 3.8 mm 4.5 mm 4 mm 5 mm 4.8 mm 6.5 mm 4.5 mm 5 mm 5 mm
Part # HVVVV040
XBA
HVVVV050
XBA
HVVVV076
XBA
HWHO76
XBA
HVVVV102
XBA
HWH102
XBA
HVVVV152
XBA
HWH152
XBA
HWW203
XBA
HWW254
XBA
HVVVV305
XBA
C55 038 050 075 C55H-075 100 C55H-100 150 C55H-150 200 250 300